Doogs Posted October 17, 2007 Report Posted October 17, 2007 Hey, Soon i will be looking out for a few more cheap rims to have thrash tyres on, and was wondering (to help out my search, and help know what else i can look for at the wreckers), what other cars share the same stud pattern and wheel/rim diameter, with a fairly similar width of rim + tyre, as the Ke's. Are there other jap cars with similar specs ? Dattys or old Gallants or something ? Your help is much apreciated ( i hope this has not been asked a million times before, making me look even more stupid :lolcry: ) Cheers Quote
Des Posted October 17, 2007 Report Posted October 17, 2007 Rwd Celica's. Rwd late 70's and 80's model Corona's. 70's model lancers Sigma's I guess Galants as well. Starion's fit. Quote
Doogs Posted October 17, 2007 Author Report Posted October 17, 2007 AE70 said: Rwd Celica's.Rwd late 70's and 80's model Corona's. 70's model lancers Sigma's I guess Galants as well. Starion's fit. Thanks man, That helps a lot, i did'nt realise there would be so much choice! Quote
philba Posted October 17, 2007 Report Posted October 17, 2007 R31 Skylines also have 4X114.3 but their 15" Quote
LINDSAY Posted October 17, 2007 Report Posted October 17, 2007 depends which KE you have , KE1# throung to KE2# have 4 x 110 stud pattern which is only common with old mazda ( rotaries and early ones ) the KE3# onwards have 4 x 114.3 which have much more available car wheel stud pattern chart Quote
YKE 20T Posted October 18, 2007 Report Posted October 18, 2007 lindsay is correct. my ke20 has a set of simmons which came off of an rx4. the mazda's ran 4x110 untill the series 3 rx7. apart from the commercial vehicles the rest were the same. Quote
Doogs Posted October 18, 2007 Author Report Posted October 18, 2007 thanks all, I am intending to pick up a ke15, 20 or 25, but it is still useful to know what i can use I will look around for some rx4 rims Are there any 'stockies' that will fit? Quote
Des Posted October 18, 2007 Report Posted October 18, 2007 Every car i mentioned has a different stud pattern to a ke15/20/25. Rwd 323's S1 S2 S3 rx7's Rx4/3/2 R100 Quote
DearmanKE Posted October 23, 2007 Report Posted October 23, 2007 geminis fwd celicas and corollas Quote
TIMMMAAAAYYY Posted November 26, 2007 Report Posted November 26, 2007 Cordia rims fit nicely on a 35/55 and 70 Quote
Felix Posted November 26, 2007 Report Posted November 26, 2007 Rad Rolla, if it is for a ke1x or ke2x, look for RWD mazda 626 rims. They are 13x5.5" and are way easier to come by than the rx4 rims. Quote
Des Posted November 26, 2007 Report Posted November 26, 2007 Rwd 323 are reasonably common in wreckers and have 13x5 or 5.5 rims too. Quote
Felix Posted November 26, 2007 Report Posted November 26, 2007 I had some rwd 323 rims on my ke15 at one stage, the ones I had were 4.5" wide. Quote
Des Posted November 26, 2007 Report Posted November 26, 2007 dam thats thin, Maybe 626 are the better choice Quote
Hiro Protagonist Posted November 27, 2007 Report Posted November 27, 2007 Shizotimang said: geminis fwd celicas and corollas Useless, useless post. FWD Celicas have either the 5x100 (SX ST162s and every other one since) or 4x100 stud pattern (ST model ST162). Neither of those will fit a KE FWD Corollas have 4x100 PCD, or 5x114.3 on the very new ones, also neither of which will fit a KE Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.