Palmy Posted October 8, 2007 Report Posted October 8, 2007 hey i have a KE55 and want to know if it will be easy to install Holden VX indicators onto it? would i have to change over the connectors and/or switch wires? i can't find any pics or info on this anywhere on internet and don't really wanna go round town unhooking peples indicators and taking a look at them....lol Quote
towe001 Posted October 8, 2007 Report Posted October 8, 2007 First of all you'll need some of the wire and connectors from the vx cause the '55 has different fittings and it'll also be the same with the hole in the panel. Don't know what'll need to be done but i know that with the gemini the hole needs to be enlarged about 10mm or so for the blinker from a vs to fit. But like i always say "sniff it and see". Pull (unscrew) the blinker from the '55s panel and see where the vx blinker hits on the panel Quote
kangaroosa Posted October 8, 2007 Report Posted October 8, 2007 Then theres the case of having an oval light in a rectangle recess. Not a major issue. Just that it may look a bit tacky. Quote
towe001 Posted October 8, 2007 Report Posted October 8, 2007 Yeah thought the same thing when i was having a look at me dads camry indicators. It'll be different, maybe a little tacky. Would have to give it a sniff and taste. It'll be the only to see if you like it or not. Thinking about it, it'll be something that'll only really stand out once its pointed out. Quote
Palmy Posted October 8, 2007 Author Report Posted October 8, 2007 yeah well I'm going to paint it soon so i will most likely bog up the recess and make it flat Quote
ke11restorer Posted October 9, 2007 Report Posted October 9, 2007 just bog it all up haha shaved look is tuff!!! Quote
Mickoolz Posted October 13, 2007 Report Posted October 13, 2007 (edited) I fitted commo vt blinkers on my ke35, I think they're much the same. I just plated and bogged the old hole at the front of the guard and repositioned them towards the back of the guard (like where most new cars are today), on the wiring sides of things i just put new plugs on both the blinker and the car and it didn't matter which order the wires were they worked either way. Fitting was pretty easy just had to make a nice shape hole for the clip on the back of the blinker to slide and lock onto the guard. I did a couple of test runs on a bit of scrap metal first to get it right. :D If you need any help with this i can take a few photos of the hole i cut out to give you a ruff idea. Just PM me Cheers Mick Edited October 13, 2007 by Mickoolz Quote
towe001 Posted October 14, 2007 Report Posted October 14, 2007 Question - Whats the colour ? Doesn't look half bad Quote
Mickoolz Posted October 14, 2007 Report Posted October 14, 2007 Question - Whats the colour ? Doesn't look half bad Thanks mate, its that Ford Orange you see on all the new falcons its called Blood Orange Quote
Palmy Posted October 14, 2007 Author Report Posted October 14, 2007 hey thanks mate, ur car looks bloody nice!! and where the indicators sit look even better then there original position. ROLLLA had VX series Statesman indicators on his 55 which are square and he had no problem fitting and wiring them so i think i will try n find a set of them cause it then saves boggin and smoothin the recess. have a look in the rides and projects section if u want (it's a bloody nice car) Quote
Mickoolz Posted October 14, 2007 Report Posted October 14, 2007 (edited) hey thanks mate, ur car looks bloody nice!! and where the indicators sit look even better then there original position. ROLLLA had VX series Statesman indicators on his 55 which are square and he had no problem fitting and wiring them so i think i will try n find a set of them cause it then saves boggin and smoothin the recess. have a look in the rides and projects section if u want (it's a bloody nice car) Thanks dude, I noticed Rolla's blinkers the other day they look sweet, infact his whole ride is hot! It definately would be an easier option then mine. It all depends what look your after i suppose. I spent a bit of time on the body work of mine coz she was pretty beaten up so I decided a bit of extra work on the blinkers wouldn't hurt. I'll get ya those pics and dimensions tommorrow and post em here. Cheers, Mick Edited October 14, 2007 by Mickoolz Quote
Mickoolz Posted October 15, 2007 Report Posted October 15, 2007 (edited) Ok here you go, I hope this helps ya Basically you just drill a serious of holes inside the lines and file it to fit, do a test run first on a bit of scrap. Cheers, Mick Edited October 15, 2007 by Mickoolz Quote
Palmy Posted October 15, 2007 Author Report Posted October 15, 2007 thaks 4 that mate, will definately come in handy. jus can't decide on what indicators lol Quote
Palmy Posted October 15, 2007 Author Report Posted October 15, 2007 thaks 4 that mate, will definately come in handy. jus can't decide on what indicators lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.