decoop Posted April 8, 2008 Author Report Posted April 8, 2008 I probably neglected to say that i no longer (well for the moment anyway) have the need for gilmer belt drive as i sold my ke10 and my ke30 has a v6 in it. I also have an ms55 crown i'm planning to do up so for the time being i will not be looking further into this. Quote
Sinate Posted July 29, 2008 Report Posted July 29, 2008 Hey guy from nz is keen to do this. has set it all up just needs 6+ people to get discount of $450 nz. if anyone is interested please post. quality work billet alloy. Quote
reTRD Posted July 29, 2008 Report Posted July 29, 2008 (edited) hey guys I'm reTRD (Brodie) . me and a few guy off the club k car club/forum are tryiing to do a bulk buy from Endevour Engineering & Tooling LTD the kits are NZ$650.RRP but if we can get 6 people to make a bulk buy at once they are going to give us a discount of NZ$170 each kit. so that NZ$480 for the complete kit (consisting of the 3 pullys, stainless caphead screws and a belt) the bullys are made of billet alloy and lok to be of the highest quality. pic of a kit (unsure if a "K" series 1 but will be close if not the same) http://img294.imageshack.us/my.php?image=misc263sf8.jpg so far off club k we have interested reTRD x1 (me), DXROLLA x1. phatt20 x1 (maybe 2), HyTimes x1. dxrola x1. they do make them for some other motors but we are just trying to get the "K" series motor kits 1st depending on interest ill ask my contact to look into other motors also (i no they do 4AGE but unsure how much) if any1 with a "K" is interested PM, or e mail me on [email protected] and we can go from there. cheers guys Edited July 29, 2008 by reTRD Quote
harun Posted July 30, 2008 Report Posted July 30, 2008 I have been added to the list. Been waiting on this for sometime now. I suggest anyone with interest get involved now. Quote
Taz_Rx Posted July 30, 2008 Report Posted July 30, 2008 I put my hand up on Club-K. :bash: Can we get it any cheap again with say 10 buyers???? Quote
reTRD Posted July 30, 2008 Report Posted July 30, 2008 (edited) i am not sure its been a blody mishion to get the 6 people so far. if we can get 10 people keen within this week ill look into it otherwise i will just place the order of 6 at $480each. so far i have down for a kit, FROM CLUB K me x1, phatt20 x1 (maybe 2), HyTimes x1. dxrola x1. DXROLLA x1. and from rolla club harun x1. Taz RX x1. so if we can get the numbers up to 10 people keen on a kit by say sunday, ill get intouch with my contact and go for a deal. i don't no if they can or will go cheaper but i will try. so come on guys help get the numbers up, i would like to see 15 people get some but dreams r free :bash: cheers guy's. Brodie(reTRD) Edited July 30, 2008 by reTRD Quote
Taz_Rx Posted July 30, 2008 Report Posted July 30, 2008 Yeah more than I really want to pay....but where else will I get one! :bash: Put me down for one. :y: Quote
madrolla68 Posted July 30, 2008 Report Posted July 30, 2008 Yeah more than I really want to pay....but where else will I get one! :bash: Put me down for one. :y: $480 bux are you out of your FUKN mind. :y: :bash: Quote
Taz_Rx Posted July 30, 2008 Report Posted July 30, 2008 Having one of those 'more money than sense' days I think. :bash: Can't run a copper gasket until I get a block o-ringed. .......Believe it or not while typing this post I have just had a phone call with clutch prices!!!! Will PM you now. Quote
reTRD Posted July 30, 2008 Report Posted July 30, 2008 (edited) sweet as Tax RX ill put you down :y: we are now up to 8 people. me x1, phatt20 x1 (maybe 2), HyTimes x1. dxrola x1. DXROLLA x1. SLIDEWAYS x1 and from rolla club harun x1. Taz RX x1. and $480 is a good price for a complete belt drive kit. as i have been pricing up just the pullys from a place over here in NZ and it was going to be over $680 for the plain steel pullys and i was going to need to get them machined on top of that :bash: so in my eyes $480 for a complete kit is very reasonable indeed. just my 2cents lol Edited July 30, 2008 by reTRD Quote
SeptemberSquall Posted July 30, 2008 Report Posted July 30, 2008 i want one for t engine if possible will order along with this i know he'll need to tool up again for a different set but it's definate 'me too' business don't mind paying a bit closer to his regular price too if he's set up for it if he wants a minimum number let me know and i'll get a few of em and sell em on Quote
harun Posted July 30, 2008 Report Posted July 30, 2008 I pressume Club -k is in New Zealand and that is were the kit is going to be made? If so is it 480 New Zealand Dollars because: 480.00 NZD=373.639 AUD Quote
reTRD Posted July 30, 2008 Report Posted July 30, 2008 the kit is getting made by an engineers over here, i am just a member of club k that has come across this outfit and have orginised a bulk buy through the club to get the costs down for wevery1 as the kit is NZ$650 normally. cheers, Brodie (reTRD) Quote
WinKE55 Posted July 31, 2008 Report Posted July 31, 2008 So will the kit be 373.639 AUD for us? or $480? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.