tuner_till_death Posted May 11, 2007 Report Posted May 11, 2007 (edited) Engine: 4AGZE (from AW11 MR2) Exhaust: full 3" with 5" muffler and 3" dump, big and loud Suspension: custom, stiff and low just how it should be Wheels: 17" chromies, big and shiny for bling Modifications: ported and polished 20v head (from a silvertop 4age, 4agze's only have a 16v head) cometic head gasket wiseco forged pistons forged connecting rods blueprinted and balanced block custom fuel rail and injectors custom surge tank aftermarket external fuel pump custom plenum (to replace the supercharger) custom water to air intercooler (race application more effective than front mount) hks blow off valve custom turbo manifold garrett gt35r turbo exedy clutch TRD lsd oddysey battery haltech engine management custom alloy radiator k&n filter autometer gauges isotta steering wheel with rev chase meter ...probably a few more things i forgot about... bodywork: custom wide bodykit currently being built Stereo Audio / Visual: basic install, huge custom install comin soon Estimated Power: 450hp at the front wheels on 28psi before anyone says anythin, i know it needs some bodywork... it's being fixed up now in preperation for the custom wide bodykit that's goin on... some receipts are posted, i have more but i can't find em so i'll put them up as soon as i find em Edited May 21, 2007 by tuner_till_death Quote
anastasios Posted May 11, 2007 Report Posted May 11, 2007 omg please do not put a kit on this and those chromies are pretty gay Quote
Trev Posted May 11, 2007 Report Posted May 11, 2007 Thats fkn sweet, I reckon the kit will suit it if it is built around the doors, The wheels actually suit the car due to the shape, Where abouts in Ipswich has this been hiding? Quote
camerondownunder88 Posted May 11, 2007 Report Posted May 11, 2007 HI, SWEET ride. Id make it look stock as..lol But tuner_till_death do you happen to know Simon in Ippy that drives a green gemmini and do you happen to live near the raceview Yamanto area :y: As I know of a few hundred 4age dyno car hidding there so :P never seen it but is this yours? Cameron Quote
Retrospekt Posted May 11, 2007 Report Posted May 11, 2007 does it go around corners when you have any power down? Quote
BiGGy Posted May 20, 2007 Report Posted May 20, 2007 (edited) Wow a very clean setup you will have there, thats allot of money and I hope it all goes well. I don't believe you will get 450hp atw, but I would like to see that! Ive got a few questions and suggestions if you don't mind. What cam specs and compression will you be running on this setup? Are you increasing valve sizes at all? Thats an enormous amount of pressure to get 450hp, have you thought of boring and re sleeving the block to be on the safe side? Also a de-stroked forged crank with some with bearing replacements would be a good idea, that will also play with toque alot. You are throwing alot of dosh into this, maybe some pneumatic valve springs, titanium rods and the above mods could be the next step in this project and will allow up to 15k rpm which will give you 500hp+ atw. You know it might of been easier if you sourced an ex turbo formula atlantic 4ag. They would be around the same dollar mark and have 600-800hp. Though I would imagine they be very hard to find these days if at all. Edited May 20, 2007 by BiGGy Quote
Clown Posted May 21, 2007 Report Posted May 21, 2007 Those cars look nuts! bit unfortunet about the big bling chromies, but hey, its your choice. Quote
tuner_till_death Posted May 21, 2007 Author Report Posted May 21, 2007 HI, SWEET ride. Id make it look stock as..lol But tuner_till_death do you happen to know Simon in Ippy that drives a green gemmini and do you happen to live near the raceview Yamanto area ;) As I know of a few hundred 4age dyno car hidding there so :bash: never seen it but is this yours? Cameron yeah i know simon, are you friends with him? if you are you should get him to bring you round so you can check it out in person, my name's matt... the car was at yamanto, then raceview, now east ipswich... guess i should stop moving so much hey... lol Quote
Clown Posted May 21, 2007 Report Posted May 21, 2007 What's been done suspension and brake wise? Quote
Clown Posted May 23, 2007 Report Posted May 23, 2007 What sort of price do you pick these up for?? Quote
deri2k3 Posted May 28, 2007 Report Posted May 28, 2007 i never seen one of this before, what country does this coming from? nice little car btw! :D Quote
Clown Posted May 28, 2007 Report Posted May 28, 2007 they're jap imports, not many come up for sale from what i can see. Quote
camerondownunder88 Posted May 30, 2007 Report Posted May 30, 2007 yeah i know simon, are you friends with him? if you are you should get him to bring you round so you can check it out in person, my name's matt... the car was at yamanto, then raceview, now east ipswich... guess i should stop moving so much hey... lol Hi Matt, I know simon well, you ever at drifting with him? also Id love to come see this car. Out once with simon we went to your old place now in yamanto to see it and you were out So only saw the 300ZX out the back you had after you just got it cheap..lol But hey get back to me ASAP well catch up. Cameron Quote
tuner_till_death Posted May 30, 2007 Author Report Posted May 30, 2007 Hi Matt, I know simon well, you ever at drifting with him? also Id love to come see this car. Out once with simon we went to your old place now in yamanto to see it and you were out So only saw the 300ZX out the back you had after you just got it cheap..lol But hey get back to me ASAP well catch up. Cameron sorry guys, havn't been on for ages... yeah i go out to drift meets with simon every now and then... i've sold the 300zx, now i'm buildin up a hot pink mazda capella for my girlfriend... i look forward to meeting up with ya bro... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.