emu Posted April 9, 2007 Report Posted April 9, 2007 Are the stud patterns the same on a KE20 motor as on a 4K KE55 ? Would you think an aftermarket KE20 ehaust header would then fit a KE55 ? I'd really appreciate any advice here Thanks Pete Quote
coln72 Posted April 10, 2007 Report Posted April 10, 2007 Yes it will bolt to the motor :) No it wont fit into your shell ;) Quote
anastasios Posted April 10, 2007 Report Posted April 10, 2007 i have a set of tuned extractors for a ke20 with 02 sensor aswell, i will need to get them into my 55 so i will let you know how it goes Quote
emu Posted April 10, 2007 Author Report Posted April 10, 2007 i have a set of tuned extractors for a ke20 with 02 sensor aswell, i will need to get them into my 55 so i will let you know how it goes Thanks anastasios, good luck, notice coln72's response above, not 100% sure what that means Let's know how you go Thanks Pete Quote
emu Posted April 10, 2007 Author Report Posted April 10, 2007 Yes it will bolt to the motor :) No it wont fit into your shell ;) Thanks coln, what do you mean by "shell"...............do you mean the engine bay? where is it going to foul something? Is it just a matter of bending the pipe/s ? Thanks for your help, ........Pete Quote
anastasios Posted April 10, 2007 Report Posted April 10, 2007 it hits the fire wall, so I'm going to see how bad it actually is as i might be able to fix it with a hammer Quote
emu Posted April 10, 2007 Author Report Posted April 10, 2007 it hits the fire wall, so I'm going to see how bad it actually is as i might be able to fix it with a hammer Thanks Anastasios, let's know how you go with the hammer! Quote
emu Posted April 10, 2007 Author Report Posted April 10, 2007 Yes it will bolt to the motor :) No it wont fit into your shell ;) Coln72, is Anastasios' experience what you're talking about...........hitting the firewall? Can't the pipes be heated and bent enough effectively, or the firewall dented? Quote
Felix Posted April 10, 2007 Report Posted April 10, 2007 They would probably fit, though you would need to cut the pipe off at the collector and remake a new one. The pacemaker extractors in my ke15 were originally in a ke30 before I got them. I had to do the above. Quote
emu Posted April 11, 2007 Author Report Posted April 11, 2007 They would probably fit, though you would need to cut the pipe off at the collector and remake a new one. The pacemaker extractors in my ke15 were originally in a ke30 before I got them. I had to do the above. thanks Felix Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.