skygts4 Posted December 16, 2006 Report Posted December 16, 2006 hey guys, been tryin to find information on this forum about a cross flow head for 4k engines, but I'm findin it hard to find the information. where can i get a cross flow head from? or is there a head from another engine that could bolt onto the 4k block? any info will be helpful. thanks
Raven Posted December 16, 2006 Report Posted December 16, 2006 No such thing. Thats the reason you wont find any information.
skygts4 Posted December 16, 2006 Author Report Posted December 16, 2006 (edited) A cross flow head; having th intake ports on th head on th opposed side to the exhaust. In on one side, an out on the other.. cross flow. so u can't get one of these heads for a 4k? thanks for ur help though raven Edited December 16, 2006 by skygts4
Redwarf Posted December 16, 2006 Report Posted December 16, 2006 (edited) A cross flow head; having th intake ports on th head on th opposed side to the exhaust. In on one side, an out on the other.. cross flow.so u can't get one of these heads for a 4k? As previously stated, no such animal. Not for a 4K Edited December 16, 2006 by Redwarf
mattress Posted December 16, 2006 Report Posted December 16, 2006 Actually i read somewhere about a cross flow head for the 4K. If only i could remember the web page. I think it was some american company who was making them back in the day...
Redwarf Posted December 16, 2006 Report Posted December 16, 2006 The only one I know of was the 150E twin cam, and you'll never see one of those.
Trev Posted December 16, 2006 Report Posted December 16, 2006 ... There was also a 150E 16-valve version of the 3K / 4K engines. These 16 valve heads were the forerunners of today's 4AG, 3SG, 7MG, and 2JZG engines. These were race only non-production heads, with heavily modified blocks. Toysport
Recommended Posts