Search the Community
Showing results for tags 'sr20'.
Found 14 results
-
Hi all, i am up to the point were i want to start wiring my Sr20 engine harness to my ke55 body loom, for those of you who have done it or know whats required able to fill me in with what wires i need to connect to get the motor running, also have an external fuel pump which needs to be connected to...
-
Hi everyone, the corolla you can see in my pictures, the bluey greeny ke55 is starting to blow alot of smoke and the engine is being a right pain in the arse ever for a 4k with 180,000km on the clock. decided to do an engine conversion on it, but I would like people with more experiences advice. Wha...
-
Hey fellas, i have finally got my ke55sr near complete but running. I took it for a drive and drives well but there is a constant whirring sound when i am idling with the clutch disengaged. I have removed the clutch rod from the pedal and noise is still there. When i depress the pedal the noise goes...
-
Hey fellas, i have finally got my ke55sr near complete but running. I took it for a drive and drives well but there is a constant whirring sound when i am idling with the clutch disengaged. I have removed the clutch rod from the pedal and noise is still there. When i depress the pedal the noise goes...
-
Hey fellas, wondering what you guys have used as a clutch master cylinder in an Sr conversion in ke55. It's a pretty tight space so I can't use the standard Sr clutch master as it will stick out way past the intake mani. Have heard about the ta22 but not sure dimensions and compatibility. Cheers
-
Hey fellas, I'm about to install my clutch master in the KE55. I purchased an S13 clutch master and going to be mounting to standard ke55 manual pedal. Does anybody know the best way of measuring and positioning or has anybody done this before and have a drill template?? Cheers
-
Hey fellas, Another question about me old conversion. Trying to figure out the best way to run a clutch cable to my sr trans. Would you guys suggest buying standard clutch cable and modifying or any other ideas from the guys who have done it before?? Cheers
-
Hey guys, I'm in the middle doing an Sr conversion into my ke55 and I'm trying to figure out what's best for fuel system. Whether to use inline or in tank fuel pump. Which one you guys recommend. Also what size fuel line for feed and return. Cheers
-
Hi Fellas, I've been trying to figure out which radiator will fit in my KE55 with Sr20de. Measurements for s13 radiator if i set it hard up against the front would be too high for bonnet to close. Are there any alternatives with correct inlet/outlet orientation that will fit or should i try and...
-
Hey everyone, though id do a build thread of my ke project, maybe get some advice along the way and get more involved in the community Building it for drift use only, not engineering it for roadworthy purposes Bought it fairly stock, had an s13 front suspension and coilovers and that was it...
-
Hi guys and gals, I would like to introduce you to Betsy, a 1975 KE30 4 door with no working engine. I purchased her on the 15.08.13. She looked rather straight and upon inspection I could not find any significant rust spots so I organised for the sellers dad (a tow truck driver) to drop her off...
-
Hi, I’ve been a forum lurker for years now and finally thought it was time to put up my build thread :) Expect it to be VERY long, sorry :P First a bit about me. My name is Marcus and I’m 17. I’ve been hooked on cars my entire life, it’s so true my first words were brooom broom, haha. At 12 m...
-
Hi, i knows this question has been asked before but as I'm new to the roller scene and i really don't know what to do. i have looked at doing conversions from 4age, sr20, rb20 to rotors but I'm not sure were to start and the complexity of the conversion as its my first "do up" car. so I'm not sure i...
-
Hi all, I have recently purchased a ke55 and a s14 sr20 half cut in sweet nick! I have stripped both car and half cut and are heading in the xt 130 corona arms and strut with ra60 vented disks . The thing is I can't seem to get any info on Crossmembers? is the original ok? 1. Do I have to mo...
