Raven

Where's the video? :P

Link no workies!

The place Luke is referring to in the city is Motor Radiators or NATRAD as most people call them. They're one of my customers and do a bloody good job. Being down South, I know for a fact that Southern Radiators do a good job as well as they're also one of my customers. I suggest you give them both a call and see which one is cheaper :)

Nah he's piking it again for another year. Only gonna be us two cos everyone else are slack mofo's!

I did mention the pins holding the spider gears right under where I posted the diagram ;) Good to see its all sorted :)

Just question your source of information for your view on hydraulic cams? Hydraulics and solids have VERY different grinding techniques. The 5K I'm selling as a Wade Cams 242A Grind Hydraulic Cam in it with Anti-Pump Up Lifters. The only reason people convert to a solid cam grind is for high rpm use. If you're not going to rev the ring out of it, stick with hydraulic lifters. The stock hydraulic lifters are also good for 8000rpm. Ask Coln72. He used to compete in dirt events with his KE20 and has first hand experience. Get Jono1986 to take you for a spin in his KE35 once he's fitted up the engine and got the twin dellorto's on it ;)

Sweeeeeeeet. I'm almost ready to rock n roll. Just gotta sort out my front mount intercooler in the next couple of weeks.

Yessir!

Just tryin' to look out for ya so you don't get ripped off dude :)

You'll do it and say to yourself "why didnt I do that the first time!" Then you'll thank us in beers and cheers :P Haha, let us know how you get on.

I'd want that in writing ;)

Yep, bolt the drum on back to front onto the axle and give it a wack with a mini sledge hammer. Should drop out ;)

There is the Grange Train-line. I'm 5 mins to the train stop and 6 mins by train to the train station. Buses are pretty simple too, depending on the area. I'd really consider the outer suburbs around the city centre as you'll have a heap more space and probably secure parking.

Just to give you an idea, those pins that hold the spider gears can cause issues. This is the basic layout of the Banjo (Jap) Diff. Pretty simple to pull apart, if you need a hand, let me know. :)

Also got a spare complete diff if required, but its a little noisy from memory, and that was outta my KE25.

Looks the goods. Needs more dash pics. I want to see the fitment ;)

That was me. Speedo was out in the red rocket and I didnt know, hence the speeding fine. Speedo is dead on accurate in the Chaser though, so it shouldnt happen this time.

I sell parts for these on a daily basis. Just make sure you enforce the warranty part if something does happen :)

I'd be more inclined to say you may have a few teeth missing on the spider gears. Being a Jap diff, it may pay to pull out the centre and inspect it.

Brand new ;) Customer in town rebuilds the KAAZ/Cusco centres. Up to you, but I know I wouldnt want extra weight slowing me down ;)

You do realise I can get parts out of Japan yes? Not only that, Cusco, Tomei and KAAZ make brand new centres to suit a T-series, I could have a new centre landed at your door for under a grand. Picking up a T-series is $250 bucks at a guesstimate. Grab one out of a TE72. Then its just a matter of changing over the mounting points. Pretty cheap if you ask me ;)

Did you know that all L67's spin rod bearings? I warned my cousin against getting an L67-powered VT Calais and he didnt listen. Week and a half later it blew and ate the crank and all. $6000 later and new engine has been built and guess what, it'll do it again. I say quick fix it and piss it off ;)

$700ish to shorten an R31 diff, but it will add more weight to the rear and being as its a cone-style LSD, they tend to open wheel a fair bit when the wear out. T-series on the other hand would be a better option as all thats required to fit it up is having the spring mounts changed from coil to leaf and thats about it. Then you have the option of a 1/1.5 Way LSD or a 2-Way LSD if you feel like hitting the track and going for a slide and a heap of ratio's to choose from.

Sure we do. He's just being an ass :P

And the state speed limit is 100km/h ;)