Jason

OK ive got the step by step in photo shop. 1. Scan the image in.

And put some of the UV activated stuff on the needles :P

ive got the PDFs but there 14mb each :P but when you print them out, they are perfect size. If they were stickrized, what would happen with the holes? Could they be cut out? What about the different colours? Probably be to much effort. Eh

the large speddo ones, i get a flat screwdriver and just pop them up. My smaller needles have problem though, i got 2 out of 4 out. They feel like there gonna break soon :P I'm gonna leave them near a heater, see if they soften up.

Boring Ke70 tacho... now.. Extreme!!! :P My new T18 dash, all the colors have faded I'm defiantly doing this :) Now to get the little needles off the oil pressure, volt, fuel and temp gauges :D

Tacho.

Some T18 quick ones. Typical white background. Looks good even with non gloss 'Econo' laser prints.

Welcome Aboard :D sucks to have 56K :P

Its OK, but when to try to make microwave cannons and say it can't be done..... Its public safety warning :(( *Cough* you have to arrange the magnetrons in phase *cough* :blinks:

Id see what you could do with a hammer and some bog first. Becuse it dosnt look that bad

take the kick panel off and you will find a nice surprise :)

the shc80 is about 1cm thick, rated much higher. There called piston cannons. They allow for incredible vale opening time (which limits most like mine) So the valve is fully open almost instantly. With sprinkler valves, they tend to flutter and not open fully until the projectile has left the barrel.

all sch80 pipe with high pressure primer and green glue. Taken it up to 180psi. Pipes rated 320psi (Absolute max) To bad i dropped it while it has pressurized, and blow/cracked the bushes for the tank. So now i need to cut it off and get 80mm > 25mm male thread again. Measures 1.2m from end to end. over 130m/s at 100psi threw a C battery wrapped in gaff tape which Mushroomed into a rock wall. Also great for shooting PVC rockets and losing them through out the neighbourhood. :)

the question should be... who hasnt made one?!?!1111 one one Ive also got a air cannon :) more fun, cept you need a air compressor the stand was so you could aim the thing with out knocking out your shoulder

lol :)

welcome :)

!!!!! btw how do u get the page to english?

hate to imagine :)

Wile getting distracted from some assignment work, i cam across this web site. I think its soo cool they way they move :D Robot I want one :)

Doggie Daddy :)

ahahah its so true :)

Link works, he just cut the roof off :)

bah, getting the 4agze out of a sprinter :) You just can't imagine how low this thing was, at first we couldn't even get a jack under the skirt ! Disconnected the Gbox. draged it out with some straps we found in it. That was fun considering it was 8pm at night and me covered in the lovely fragrant smell of transmission oil :) with 2 desk lamps for light Then i go to teddy, hey what the hell lets get the motor out! With a stop sign post across the engine bay, attached again with the dodgy lock straps we found we got it off the mounts twisted the engine into a E-W configuration, and drooped it out between the Xmeber and the front lip! Then got my engine stand on the ground bolted it up, then lifted the motor up right :) and wheeled it into the garage

Holy crap these holidays have com up fast! Well getting a welder out next week, so i can do some hard core crash coarse body work :) Already made up some of the 'jig saw' pieces from the shell of the microwave nick gave me :) does it really matter what type of metal you use to reweld the body, some were i herd if you use different types of metal it will rust? or is it just BS AND the good new keeps coming my mums BF (the welder) has a MIG :)

ahahah :)