Taz_Rx

Gotta take it on the chin when you've got away with for years hey

Those pics would actually be hosted here somewhere. Look for a projects thread for a user named jamesrolla iirc

That'd be it. Don't forget to port match your weber manifold to the 3kbp size too

Get yourself a permaseal em30 manifold gasket. 1 piece and have inlets the size of a 3k big port. I did a group buy of copper em30 replicas a few years ago. They're friggen awesome. Don't know if you'd be able to find one still kicking around though.

Tommy's made close enough to 130....

I went 40 thou over on my last rebuild. Can't remember if they we're acl or not though. Ask at a local machine shop

Pull the pump off the block, the lever is on the back side and runs off the camshaft

You need to also double check weather it's a coil to be used with our without a resistor

I have 'over-run fuel cut' activated on my wolf. Cuts fuel completely with 0 throttle above 2900. I tried it lower but will stall as the recovery doesn't have time to catch it. Makes a nice little pop when it kicks back in sometimes. I'm sure it saves me a little bit in fuel as you spend more time at 0 throttle than you ever do at w.o.t.

Is this in a 4k block? A 4k is essentially a stroked 3k.

lol love it

I've been meaning to do this update for about a month now..... Finally got around to making new brackets for the 15" thermo fan I've had in the shed for about a year. The twin 10"s worked, but the new 15" drops temps a heap quicker. The brackets I originally made for the commonwhore radiator worked... but weren't pretty, so I combined the fan and top rad mounting bracket, made from 3mm alloy sheet. Bending it was fun in a home shed! While I had it off the road I pulled the manifolds off for the first time in a couple of years.... The copper manifold gaskets I did the group buy of were the best investment ever!!!..... and gave everything a good clean up and re-polish. In other news the clutch has started slipping again, but only when you flick the boost switch Grrr. When I changed it last time I did change the front main seal of the T50. Think maybe I've got a leaking rear main on the engine itself though. I work for 'Ten Days on the Island' now and festival is about to start, so when its all over at the end of the month I'll get the box out again in April and sort the slippage again.

You're quoting me why? Since that was 10 years ago I can now say I'm 100% sure of that fact! Lol

http://www.rollaclub.com/board/user/9270-t/ Pm him and ask him if he can make you a set of te27 flares like what's in my 55.

Try username here .T.

Calipers look like 86

We took 100 thou off my 3ķ head and they still fit fine.

Sorry misread. Pushrods not conrods. You could try and find some tomei chrome moly a12 ones like I have. Guess they don't pop up real often though, mine were never advertised as far as I know and were offered to me.

Don't want spool?

http://m.ebay.com.au/itm/Intercooler-front-mount-mx6-corolla-/262853181985?hash=item3d33454221%3Ag%3A63oAAOSwHMJYGYHO&_trkparms=pageci%253A587699b4-f582-11e6-a882-74dbd18008c2%257Cparentrq%253A4f0f481e15a0a622861069aefff4324d%257Ciid%253A3

Maybe seek untubbed_20's input on that. Without adequate bracing and maybe still with, its a lot of weight and leverage hanging off the exhaust manifold. You could try and find an mx6 cooler like mine rather than some wanky cross flow aftermarket thing.

Didn't know 10's had the battery on the drivers side. Leaves a nice void behind the passenger side headlight.....

I've got a coffee jar lid over the top of my custom cas as well.

What happened to the infection setup?