https://www.rollaclub.com/wiki/api.php?action=feedcontributions&feedformat=atom&user=Jason 2026-06-10T07:45:26Z User contributions MediaWiki 1.39.2 https://www.rollaclub.com/wiki/index.php?title=Tech:Engine/A_Series/Rebuilding_Your_4ag(z)e&diff=1716 2006-03-17T10:21:53Z

<p>Jason: </p> <hr /> <div>Part 1# Pistons And Robs<br /> <br /> What you will need.<br /> <br /> You pistons<br /> Small nose pliers<br /> Hot plate and sauce pan<br /> Thermometer<br /> Old rag<br /> Hammer<br /> Bash rod<br /> Oil<br /> 15min per piston<br /> <br /> <br /> IMG<br /> <br /> Prep: get your pliers and intall the 'stop' circlip<br /> <br /> <br /> <br /> IMG IMG<br /> <br /> <br /> Heating the piston.<br /> You have to heat the piston to 70-80oC for the pin to go in. <br /> <br /> IMG<br /> <br /> Wile you wait, you can find the front of the rod. There will be a raised point near the crank end. (Dot) This is the front, the front of the piston is the arrow, you match them... rocket science here.<br /> <br /> <br /> IMG<br /> <br /> <br /> Now after you piston is nice and steamy, bring it out and lube out the Pin with some oil, them gently tap it into the piston.<br /> <br /> Just after it exits one side, put the rod in making sure it facing the front, then punch the pin in some more, making sure the rod doesn’t fowl<br /> <br /> Keep going until its complete inserted.<br /> <br /> Once in reinstall the other clip and done.<br /> <br /> How easy was that!<br /> <br /> <br /> IMG</div>

Jason